Good price and quality Reflective hot melt marking coating Manufacturers china is indispensable or feasible in our traffic safety facilities. The use of road markings and other road signs can effectively control the traffic flow and reduce the occurrence of traffic problems. At present, the materials and construction methods used for road marking in China are various, but the common equipment for marking construction is mainly small equipment with low degree of automation. The molding quality is greatly affected by the technology of equipment operators and the level of construction process control. The scratch type good price and quality Reflective hot melt marking coating Manufacturers china has the advantages of uniform surface, smooth linearity, long service life, strong road adhesion, simple construction technology, short construction period, and small impact on traffic, which has been widely applied in recent years. Today, we will learn about the construction process of scratch good price and quality Reflective hot melt marking coating Manufacturers china.

Construction process principle of scratch type good price and quality Reflective hot melt marking coating Manufacturers china:

1. The construction of scratch type good price and quality Reflective hot melt marking coating Manufacturers china is mainly carried out with the cooperation of hydraulic hot melt kettle and manual scribing machine. The two are separated. The hot melt kettle heats the coating and the manual scribing machine scribes. The marking machine has two side knives to adjust the scraping thickness, so as to ensure that good price and quality Reflective hot melt marking coating Manufacturers china can be scraped on the road surface smoothly with a certain thickness.

2. At the beginning of construction, good price and quality Reflective hot melt marking coating Manufacturers china is put into the melting kettle to be heated to 180~220 ℃, in a molten flow state, put into the thermal insulation melting hopper of the hand propelled marking car, and then introduce the molten coating into the marking hopper, with the temperature maintained in a molten state.

3. When marking, adjust the gap between the marking bucket and the ground. Good price and quality Reflective hot melt marking coating Manufacturers china flows from the marking bucket into the lower coating bucket. Push the marking car. The molten material flows by its own weight and scrapes a neat marking line. Adjust the equipment and spread reflective glass beads on the marking line in time.

To sum up, strengthening the standardized and standardized management of the construction process and optimizing the construction process are the key to ensure the quality of the finished products of the scratch type good price and quality Reflective hot melt marking coating Manufacturers china.