As we all know, the road traffic hot melt mark line has reflective performance and certain recognition, so what is affecting the visibility of the hot melt mark line paint, let's take a look:

001 Whether day or night road traffic hot-melt line should be bright, uniform, clear, there is enough visual recognition distance.

002 daytime visibility depends on the quality of the pigment, which is relatively easy to solve, visibility at night, that is, reflective, first depends on the quality of the glass beads, glass beads should be evenly distributed, appropriate amount, too much or too little will affect the reflective effect of the marking.

003 Second road traffic hot melt line construction temperature control is very key, the temperature is too high, the fluidity of the coating will be stronger, that is, the dilution is low, and the glass bead deposition faster even into the molten hot melt line coating inside, so the reflective effect will be poor; Temperature is too low, glass bead is attached not firm, can assure the immediate glance effect after construction only, and long glance effect is poor.

Experience has shown that the diameter of the glass bead half buried coating in the reflective effect is better, but not so easy to do this, so the temperature of the glass bead is traffic hot melt marking paint coating, thickness, the influence of climate conditions, to strictly control the construction time, pay attention to the cloth and zabbud equipment situation of glass beads, and crossed the wind and the wind influence on glass beads and cloth, Glass beads should be avoided crowding in piles.

Spread too much to make the tone of the day bad and produce uneven, but also easy to make dust sticky and reduce identification. The size, roundness and quality of glass beads are also important factors affecting the visual recognition. I believe you can draw a more recognizable road traffic hot melt line after paying attention to the above factors.