As we all know, there is a road marking construction method by adding glass beads in hot melt paint, to achieve the route at night visible.

Road marking reflective paint in the glass beads are composed of silicon, sodium, calcium and other components of the glass smashed, high temperature fired into a small diameter of glass solid ball, good reflection performance. It is applied in normal temperature type, hot melt normal type marking coating, as a premixed material surface sprinkle, play a reflective effect. If the nighttime route reflection is not enough, this is mainly to appear on the road marking reflective glass beads, the glass beads on the marking lines are spread unevenly or scattered too little, because the road marking paint itself will not emit light, is in the paint in the project sprinkle glass beads, the light shines on the glass beads reflected back on the marking lines.

If the reflective light of the road marking is not enough, Ruzubon suggests that you can try to adjust the spitter in the equipment, according to the normal situation of 1 ton 4 bags. This reflective road hot melt type of marking on the road surface, at night through the lights on the marking reflected to the driver's eyes, can make the driver see the road marking, driving process to ensure driving safety. Due to the popularity of road hot-melt reflective marking, some factories in the road also began to require the use of this type of marking, in order to night transportation safety, contact guangxi road state construction.