The primary function of traffic markings is to promote lane separation. According to the road traffic markings drawn on the expressway, correctly guide cars of different types and speeds along the divided lines to comply with traffic laws and regulations, thereby improving road freight Work ability and the purpose of reducing road traffic accidents; signs and trailers. Drivers anticipate road conditions based on road traffic markings.

Features of road marking paint:

1. Fast and dry: road marking paint changes with temperature changes. In severe cold seasons, the hard bottoming changes quickly, in warm seasons, the hard bottoming changes slowly, and when the coating is slow to dry, it is not only the paving glass marbles. Move down in the architectural coating to reduce the ability to return to light, and will continue to slow down the open traffic travel time and reduce the road capacity.

2. Adhesion: Once the road marking paint is under construction, it is not easy to fall or break. Because of its very good adhesion to the ground, it is not easy to be caused by the rolling, side slip or braking system of the car. Changes will occur, and will not change due to seasonal temperature changes. However, if it is spread on a concrete floor, the adhesion is not very good. You must first rub the traffic marking undercoat to improve the adhesion between the floor and the paint.

3. Recognition: Because the effect of road marking paint itself is that the distance can be clearly distinguished no matter whether it is day or night. The level of the effect of returning light immediately lies in the paving quality of the glass marbles. To be appropriate, too much or too little will harm the actual effect of returning light.

4. Anti-aging: Both northern and southern climates can be integrated, and the adjustment of raw material preparation can be carried out according to different seasons and climatic conditions. It can be used in different seasons without any problems.

5. Scope of application: road marking paint can be applied to the axles, lane dividing lines, edge lines, and mesh lines with many rolling vehicles; sidewalks, intersections, underground parking lots, and roads without lights at night.