High quality road marking paint products include normal temperature solvent type and hot-melt reflective type. It is suitable for traffic marking and rerouting of asphalt or concrete pavement with various flows. It has many characteristics, such as hard paint film, wear and weather resistance, good color retention and good pavement adhesion. It is the preferred marking paint for expressway, high-grade highway and large flow highway.

High quality road marking paint product type:

1、 Hot melt road reflective marking paint products

Road reflective marking paint is a small powder coating synthesized by using foreign high-quality resin, pigment, aggregate, additives and other chemical materials. The coating is melted by heating, and can form a thick film at a suitable temperature. The film has bright color, strong identifiability and excellent reflective effect at night. It has good construction performance, fast drying, strong adhesion, good wear resistance and durability. It is suitable for coating asphalt, concrete and other pavements. It is especially suitable for coating urban roads and expressways requiring fast drying as signs and markings.

2、 Normal temperature (cold applied) road marking paint products

Cold applied road marking paint products are made of resin, pigments, fillers and organic solvents. Fast drying, medium resistance and good workability. It is widely used in asphalt, concrete and other pavements, factories, organs, schools, parking lots and sports fields. 3、 Hot melt road reflective coating is generally suitable for suburban highway and expressway road markings.

Composition: one component coating composed of acrylic resin, pigments and fillers, additives, solvents, etc.

Characteristics: the paint film is tough, strong adhesion and excellent wear resistance. It has excellent water, alkali and weather resistance. The paint film is clear and does not seep color to the asphalt pavement.

Purpose: suitable for marking asphalt road.

Appearance: yellow, red and white

Density: about 1.30 μμ

Coating method: roll coating, brush coating and spraying

Diluent: jb86 special diluent

Drying time: 23 2 ℃: surface drying for 3 minutes and practical drying for 10 minutes

Coating interval: 23 2 ℃: Minimum 1 hour

Theoretical dosage: 320 ~ 350 g / m2

Paint film thickness: wet film: 250 μ m； Dry film: 100 μ m；

Surface treatment of high-quality road marking paint products: during brushing or roller coating construction, rapid brushing in the same direction must be adopted. Do not brush back and forth to prevent asphalt seepage. The dilution dosage shall be appropriate, and the construction shall not be carried out under hot direct sunlight to prevent asphalt seepage.