Good price and quality reflective hot melt marking paint material is generally composed of thermoplastic resin, pigments and fillers, reflective materials and other additives. The hot melt coating is powder at room temperature. There is no solvent volatile component in the composition. It is melted by construction heating, then coated on the ground with special equipment, and solidified into a film by physical condensation. The fluidity of reflective hot melt marking paint material is a very important technical index in the construction process. By adjusting the proportion of flow aid in the coating, on the premise of ensuring the quality, the coating has good fluidity, is conducive to the construction, and achieves the purpose of controlling the cost at the same time. Good price and quality Reflective hot melt marking paint material is a kind of paint applied on the road. Reflective hot melt marking paint material is a kind of safety mark and a "language" in highway traffic. At present, there are three types of road marking coatings used in China: hot melt type, water-based type and normal temperature solvent type. Traffic safety management departments use road markings to strengthen traffic safety management, reduce accidents and beautify urban roads, and eye-catching road markings depend on high-performance reflective hot-melt marking paint.

good price and quality Reflective hot melt marking paint material is characterized by fast drying and drying time of 1-3min. Synthetic resin combines colored pigments, physical pigments and reflective materials with the pavement. It has the characteristics of strong adhesion, stable performance, long chromaticity, brightness and reflectance, and it also has good wear resistance and skid resistance.

Requirements for good price and quality reflective hot melt marking paint material of highway:

1. Short drying time and simple operation to reduce traffic interference; Secondly, it has strong retroreflection ability, bright color and high reflectance, so as to have good visibility during the day and at night; Third, it has good skid resistance and wear resistance to ensure the safety of driving and the service life of markings. The hot melt type is characterized by fast drying, thick coating, long service life and good reflective continuity, but the construction is troublesome and the operation is complex,. The ordinary type has the advantages of fast drying, large construction area, simple construction and convenient operation

The reflective performance of good price and quality reflective hot melt marking paint material is formed by the glass beads in the paint reflecting the light from the car lamp back to the driver's eyes. After the vehicle light enters the glass bead, each prominent glass bead on the coating surface is a reflective element. The light entering the glass bead is refracted in it and reflected back to the direction of the light source on the reflective layer formed by the bottom surface of the glass bead and the coating.

The reason why the surface of good price and quality reflective hot melt marking paint material is easy to be polluted may be the influence of temperature or season. The coating becomes soft, the viscosity increases, and it is easy to be contaminated with dust. Excessive glass beads are easy to accumulate dust and cause pollution. Excessive amount of primer penetrates into the coating and pollutes the marking. The asphalt does not match the primer used, resulting in marking pollution. Pollution of markings in crowded places.

The marking line drawn by good price and quality reflective hot melt marking paint material is concave and convex, and the height of the base plus protrusion is 5-7mm. The line type usually has square shape, dot shape, strip shape, etc. The car will have a strong sense of vibration when rolling the markings. The reflective effect is very good on rainy nights, which has a good warning and reminder effect on the driver. The good price and quality reflective hot melt marking paint produced by our company is widely used in road center line, high-grade highway edge line, curve, ramp and intersection deceleration marking, etc.