With the continuous improvement of living standards, the number of vehicles is increasing. In order to relieve traffic pressure and avoid traffic accidents, we often use customized to regulate pedestrians and vehicles, and use white and yellow marking paint to remind people to go their own way, ensure road safety and improve driving efficiency. Today, I will Types and characteristics of customized road marking paint in china, hoping to help you!

At present, there are two kinds of customized road marking paint in china commonly used in the paint Market: hot melt marking paint and normal temperature marking paint.

1. The hot-melt marking paint is powdery. Before marking, the hot-melt kettle shall be used to heat and melt the powdery paint into a liquid state, which shall be coated on the road, and glass beads shall be sown on the marking surface at the same time of marking.

2. The normal temperature marking paint itself is liquid and does not need to be heated. The normal temperature marking paint is divided into single component paint and two-component marking paint. The use method of single component paint is similar to that of decoration paint. It can be directly brushed at the place where it needs to be marked. It is generally used to mark the car position or temporary marking. The performance of the two-component marking paint in all aspects, weather resistance, long service life, continuous reflection, etc, Generally used on highways.

The customized road marking paint in china is mainly normal temperature marking paint, which is made of acrylic chloride rubber resin, epoxy resin, pigment, filler, organic solvent and other raw materials by grinding and dispersing. It is widely used for marking roads, workshop floors, factory floors, airports and large wharf
Product characteristics of customized road marking paint in china:

The paint film is hard and durable, with high compressive strength and good adhesion. It has excellent wear resistance and weather resistance.

Construction instructions for customized road marking paint in china:

1. The dust and dirt on the road surface shall be cleaned before painting. The wet road surface must be dry before painting.

2. Brush coating, spraying and roller coating can be used. If the viscosity is too high, it must be diluted with matching special diluent, with a dilution rate of 0-10%.