The china Warm spray marking paint material is packaged in barrels, which is the same as the general paint packaging. It can be used immediately after opening, and the construction temperature is 5 ℃ - 40 ℃. For the requirements of tools, it can be directly brushed by hand or sprayed by spraying machine, which is convenient and fast to operate.

During the construction of hot-melt road marking paint, it is necessary to use a hot-melt kettle to heat it to 180 ℃ - 220 ℃, and then add it to the marking machine after it is in a flowing state. The operation is troublesome.

At present, there are two kinds of road marking paint commonly used in the paint Market: hot melt marking paint and china Warm spray marking paint material.

1. The hot-melt marking paint is powdery. Before marking, the powdery paint needs to be heated and melted into a liquid state with a hot-melt kettle. It is coated on the road, and glass beads are sown on the marking surface at the same time of marking.

2. The china Warm spray marking paint material itself is liquid and does not need to be heated. The china Warm spray marking paint material is divided into one component paint and two-component marking paint. The use method of one component paint is similar to that of decoration paint. It can be directly brushed where it needs to be marked with a brush. It is generally used to mark parking spaces or temporary markings. The performance of two-component marking paint in all aspects, weather resistance, long service life, continuous reflection, etc., is generally used on highways.

The road marking is mainly china Warm spray marking paint material, which is made of acrylic chloride rubber resin, epoxy resin, pigment, filler, organic solvent and other raw materials after grinding and dispersion. China Warm spray marking paint material is widely used for marking roads, workshop floors, factory floors, airports and large wharfs.

Product characteristics of china Warm spray marking paint material:

The paint film is hard and durable, with high compressive strength, good adhesion, excellent wear resistance and weather resistance.

Construction instructions for china Warm spray marking paint material:

1. The dust and dirt on the road surface shall be cleaned before applying the china Warm spray marking paint material. The wet road surface must be dry before painting.

2. China Warm spray marking paint material can be applied by brushing, spraying and roller coating. When the viscosity is too high, it must be diluted with supporting special diluent, and the dilution rate is 0-10%.