10% Road Marking Thermoplastic Traffic Paint_Products_Guangdong Bole Road Marking Facilities Co.,Ltd.

搜索





language 

中国

韩国



Position:

Home

-

Sample

-

Products

-

10% Road Marking Thermoplastic Traffic Paint

Hot melt marking paint is a kind of powder paint is used as road surface markings . When applied a hot melt kettle is used to heat it to 200 °C (392 °F) to melt the powder, after which it is sprayed on the road surface. After cooling, the paint forms a thick polymer layer, which is wear-resistant, bright, and reflective.

Category:

Hotline: +86-20-34546872

E-mail: admin@gdbllb.cn

10% Road Marking Thermoplastic Traffic Paint

Details

Thermoplastic road marking paint

White thermoplastic road marking paint is a kind of powder paint is used as road surface markings .
When applied , a hot melt kettle is used to heat it to 200 °C (392 °F) to melt the powder,
after which it is sprayed on the road surface. After cooling, the paint forms a thick polymer layer,
which is wear-resistant, bright, and reflective.
In recent years, practical applications tests have proved that the marking lines lack surface roughness
and can easily cause wheel slip, resulting in a traffic accident in snow and rainy weather. Therefore,
some countries once restricted the use of this paint. In order to increase the antiskid performance of the line,
thermoplastic paint has added reflective glass beads. Thermoplastic can be used very effectively for large anti-skid areas
on roads and pedestrian walkways by adding glass beads.It hardens quickly and can be driven over after just a few minutes.

Commodity Type

The road marking paint thermoplastic can be divided into hot melt pavement marking coating, hot melt convex pavement marking coating and color anti-skid pavement marking coating.

The cold marking paint is divided into single component or two component cold spraying marking paint, scraping marking paint, structural marking paint, color anti-skid pavement marking paint,

water-based pavement marking paint, fluorescent marking paint and all day reflective marking paint

Construction Parameters

The thickness of hot melt paint is 0.9MM-2.0MM, and the general construction thickness is about 1.5-1.8.

Shelf-Life

The shelf life of hot melt marking paint is 2years、The hot-melt marking has a long shelf life after construction, Even if the whole project is expensive, it can help you save a lot of money virtually

because of its durability. A high-quality hot-melt marking can last for ten years

Construction
– Shoe And cooker must be cleaned before construction.
– Shoe thickness must be adjusted in accordance with the technical requirements of construction.
– Crucible of construction machines and shoe must be heated with gas stove before pouring paint industry from large cooking pot on.
– When the flow completely, the paint will go through the system 6mm x 6mm mesh filter and flows into shoe, where insulated paint in minimum temperature 180°C – 190°C.

From shoe parts, paint is pressed onto the surface of the road cover (shoe width 10cm, 15cm, 20cm).
– Execution can sprinkle reflective particles, to synchronize and spread. Seeds must be sprinkled upon painting and deep 60% on the painting surface.

ADVANTAGES

– Good adhesion
– Good durability and thermal stability
– Clear vision at day and night
– Environment friendly
– High slippery resistance
– Fast drying under a wide range of climatic conditions.Very good flow and leveling.
– Good hardness and aging resistance.
– Very good flow and leveling.

ROAD MARKING PAINT APPLICATION

Highways & City Roads Airport Runways Cycle Track Parking Lots

.The roads and highways are today subject to For designated areas from airplanes Coloured surfacing material specially We offer road marking coatings for

more wear than ever. Our retro reflective to pedestrian walkways and runway designed for cycle track, offer car park & ride facilities, directional

thermoplastic road marking coatings provide markings, all airport markings excellent exterior durability, wear and arrows, pedestrian crossing and other

superior weathering resistance and colour stability contribute to the safety and the skid resistance. traffic guidance with excellent wear

for highways, city roads & kerb markings. efficiency of traffic flow. Our road and skid resistance.

marking coating solutions provides

excellent wear and weather resistance.

OUR FACTORY

Paint filling machine Coating conveyor belt Fully automatic manipulator Goods storage area

PORDUCT MATERIALS

C5 Petroleum resin Ethylene-vinyl Acetate Polyethylene WAX Heavy Calcimu carbonate Titanium Dioxide Yellow Medium Chrome Glass Beads Cosolvent

Copolymer powder

CONSTRUCTION PROCEDURE

1. Clean pavement: Organize manual and mechanical equipment to clean the construction section of the road surface, remove all debris and loose stone, soil, floating dust.

2. Anti-fouling of road marking: The road marking of construction section shall be protected by transparent tape, and the marking shall not be polluted during construction. Remove the tape after construction.

3. Spray fine sand: Uniformly spray fine sand, dosage is 250-350g/m2.

4. Spraying high-viscous asphalt sealer: According to the structure depth and ageing of the original pavement, the spraying amount of high-viscous asphalt sealer is accurately controlled in the range of 0.3-0.6kg/m2.

5. Spray fine sand and open traffic: Re-spray the fine sand at the vehicles tyres passing by, dosage is 100-200g/m2, traffic can be opened after 1-2 hours of maintenance.

There is currently no content to display

Product Consulting
Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline: +86-20-34546872