Construction Notes:
① For road cleaning, an important condition for the firm combination of paint and road is to keep the contact surface clean. Dust, mud and moisture on the road are the main factors that affect the adhesion of the paint.
②. First of all, protect the pavement that needs to be marked so that the marking workers can clean the pavement. The entire working surface section should be thoroughly cleaned up with brooms and brushes. The accumulation should be removed with a shovel. The pavement must be dry and free of stagnant water.
③. The planning work should be stopped when the temperature is lower than 10℃, so as not to affect the adhesion of the marking coating.
④. Blow the cleaned road 1-2 times with a hair dryer to completely remove the dirt in the cracks of the road.
G35 Highway construction site
Qingyuan Expressway hot melt marking construction site
Guanglong Expressway hot melt marking construction site
The completed site of the hot-melt marking on the pedestrian crossing.
Road speed limit marking hot melt line completion site
Pedestrian crossing hot melt marking construction site
Yellow hot melt marking completion site
White raised speed bump marking construction site
Raised hot melt marking construction site
Yellow protruding speed reduction marking construction site
Measurement site for the retroreflective coefficient of white hot melt marking
Measurement site for the retroreflectivity of yellow thermoplastic road markings
Convenient Navigation
Contact Us
Address: Kechuang Industry,Tianyi Village,Dongcong Town, Nansha District, Guangzhou City, Guangdong Province, CHINA
+86 13427557901 Ms Vivian
( Whatsapp/Wechat/Line:008613427557901 Skype:vivian34686 )
online message