07-27
Use steps: (1) Put the gas cylinder on the hot melt trolley, close all the valves, and connect the coal and chlorine pipeline. (2) hang the hopper required for construction, plug in the gas pipeline, and check the microbead distributor system.
07-27
Cold spray marking machine manual
The high pressure airless normal temperature marking machine uses gasoline engine to drive the single injection plug pump, so that the coating in the machine forming high pressure spraying, wire marki
07-27
National standard yellow parking paint
Composition: with thermoplastic acrylic resin as the base material, adding pigment, filler, additives, solvent composition.
07-27
What is the difference between hot melt line paint and cold paint line paint
Road traffic is divided into: hot melt marking paint, normal temperature cold paint marking paint, colored ground slippery road reticule, shake the ground non-slip back light road marking and preform
07-27
Apply the marking paint to the road surface for marking. It is the symbol and "language" of highway traffic travel. Road traffic units apply road markings to improve road traffic, reduce safety accide
07-27
Atm-900 hydraulic twin cylinder hot melt kettle
Operatinginstruction Usesteps:(1)Openthedieselenginerefuelingandwatercoverplate(3)adddieseloilandcoolingwater,connectthedieselenginestartingpowerline(7),thebodyiron(connectthecarbattery12Vpositivepole
07-27
What are the factors that affect the reflection coefficient of hot melt line coating?
There are four key elements to harm the inverse transmission coefficient of hot melt mark paint:1, the chromaticity elements of hot melt marking paint immediately harm the inverse transmission coeffic
07-27
What are the advantages and disadvantages of marking paint
Advantages: marble and other raw materials sampling is very easy, simple processing technology, simple engineering construction, non-stick tire time is short, can quickly open to the outside traffic t