Road marking hot melt marking paint is suitable for highway, municipal road construction, can be applied to delimit parking space, no parking yellow line area, grid channel line, diversion belt, guide arrow, etc. The cold spraying of road marking is suitable for the parking space line of underground parking lot, the black and yellow no-parking line and the safety passage line of factory area with epoxy floor.

Road marking construction is mainly marked on the road surface, these lines by the sun and rain, snow and ice, withstand the impact of vehicles wear, so the requirements for the performance of the road is very high.

1. The drying time is short, the operation is simple, and the traffic interference is reduced;

2. It requires strong reflective ability, bright color, strong reflective ability, so that visibility is better during the day and at night;

3. With anti-skid, wear resistance and other properties to ensure safety and service life.

Compared with these two, the hot melt line is more durable. Road marking hot melt and cold spray price which cost high? The hot melt mark line is heated by the hot melt kettle and poured out of the line, heavily printed on the ground, wear resistance and pressure resistance, cost machine labor, so the road marking hot melt construction price is slightly higher, 40-60 a square meter or so, you can refer to different manufacturers. And the cold coating construction is simple, but not very durable, road marking cold spray construction price is cheaper, but because the construction process city directly adjust the paint on the ground, the cost of labor, the price between the two will not be too cheap.